Technology Wood || Evaluation

1. How well did I do in completing all of the things that I needed to do for this project?
2. I think I chose 8 great Ideas, for example 2 of my ideas were a Helicopter and Space Car.
3 I chose to make a Tow Truck because it looks cool and my cousin has a truck so I can hook the hook onto his truck.
4. The working drawing looks pretty good, I made good measurements.
5.I marked two straight lines on my piece of wood.
6. I sawed inbetween the two lines that I marked out and they were a little off.
7. My Chiseling was great but when I finished, the piece of wood didn't fit.
8.My tow truck assembled pretty great it looks cool and it looks like the drawing.
9. Looking at what you have produced,
10. My design works pretty good, it works when I twist the handle.
11. It looks very cool.
12. I would not have changed anything from my work if I made it again.
13. I do not wish to say anything else about it.

Technology Wood

Step 1.  I used a Ruler and a Pencil to make a full size working drawing of my Tow Truck because it would help me know the measurements of my piece of wood.

Step 2.  I used a Pencil,Tri-Square and a Ruler to copy the measurements from my drawing onto the piece of wood.

Step 3.  I marked a square line(at 90 degrees) across and along the side using a Pencil and a Tri-Square.

Step 4.  I cut off the first piece of wood using a Backed Saw.

Step 5.  I then marked out the Joint using a Tri-sqaure and a Pencil.

Step 6.  Then I used a backed saw to make 2 saw cuts and then I chiselled in between the two saw cuts.

Step 7.  After that Sir gave me a piece of wood to draw my truck design.

Step 8. Then he gave the piece for the back of the truck, then he glued some pieces of wood onto it.

Step 9. The put a hole through it and put a small cylinder throuigh it.

Step 10. Sir put on the handle and then he put on all the other pieces.

Step 11. He put on the string and the hook, then I used a sharpie to draw my design.

Technology Wood

I have chosen to make a Tow Truck for my Friend/cousin's little brother. I think this is the best choice because he has a Truck and he could hook the tow truck's hook onto the truck and drive it around. It would be used for hooking it onto a truck, he will use it at home. For this project I will have to consider having no sharp edges because he is little and he could get hurt.